Step 6 - Qualcast AQP-PC 4645 Assembly Manual

Assembly
Step 6 (continued)
CAUTION! The saw chain will stretch after as little as five cuts following initial tensioning. Refer to the
operation and maintenance manual for instructions on adjusting the saw chain tension.
CAUTION! It is essential that the correct saw chain tension is maintained. This will ensure that the saw
chain D , drive sprocket, guide bar
D
The saw chain must be correctly tensioned before it is used for the first time.
When the guide bar fastening nuts have been loosened, using a screwdriver or the multi tool blade,
turn the tension adjustment screw
• Turn the tension adjustment screw
• Turn the tension adjustment screw
D
The saw chain must fit snugly all the way around the guide bar
Using a gloved hand, ensure the saw chain
decrease the tension.
NOTE! Re-tighten the guide bar fastening nuts.
NOTE! Always check the saw chain tension before attempting to operate the chainsaw.
NOTE! Proper tension of the the saw chain is extremely important and must be checked before
starting, as well as during any cutting operation. Taking the time to make needed adjustments to
the saw chain will result in improved cutting performance and prolonged chain life
C and engine do not wear prematurely.
clockwise or anti-clockwise to adjust the saw chain tension.
anticlockwise to decrease the tension.
clockwise to increase the tension.
D
is free to move. If the saw chain
Customer Helpline 0151 649 1500
C
as shown.
D
does not move,
15