GRE HIMVCB50.18 Instruction Manual page 6

Brushes on the suction head can be removed by pulling out directly from the head.
For Vinyl, liner and fibreglass pools, it is recommended to keep the brushes on the suction head to
prevent damage to your pool.
4. F assembly
ilter bag
4.1 How to choose the filter bag
(1). Standard filter bag
It is used for the daily pools cleaning, for leaves, hairs, trees, fruits.
(2). Small micro filter bag
It is used for small debris, such as dusts, muds.
(3). Bigger micro filter bag ( it is optional, needs to buy it seperately )
It is used for dirty pools, or plenty of rubbish into the pools, such as beginning of season, after big
shower or rainning.
4.2 How to assemble the standard filter bag
(1). Put the filter bag into the basket;
(2). Assemble the whole filter basket into the machine body;
(3). Clock the filter basket by two buttons as follows C & D, please tightly close the buttons when
using.
4.3 How to assemble the small micro filter bag or bigger micros filter bag
(1). Cover the filter bag out of the basket;
(2). Assemble the whole filter basket into the machine body;
(3). Clock the filter basket by two buttons as follows C & D, please tightly close the buttons when
using.
5. Cleaning the cleaner after using the electric cleaner
5.1 Take the transparent body off the electric cleaner (following the
OPEN-CLOSE direction, rotate to OPEN direction 90 degrees), and
take the garbage out of the transparent body, and then clean it. The
tube in the transparent body can be took out for cleaning the body
completely. Fig[A]
5.2 Take out the rear part of filter bag, and take out the filter bag, and
get out the garbage, and then clean the filter bag.
A B
A B
C D
C D