Filling Chain Oil Tank - Stihl HT-KM Instruction Manual

Filling Chain Oil Tank

NOTICE
A full chain oil tank is sufficient for only
half a tankful of fuel. Check the oil level
regularly during cutting work. Never
allow the oil tank to run dry.
Preparations
Thoroughly clean the tank cap and
N
the area around it to ensure that no
dirt falls into the tank.
Position the machine so that the
N
tank cap faces up.
HT-KM
Opening
Raise the grip until it is upright.
N
Turn the cap counterclockwise
N
(about a quarter turn).
Marks on tank cap and oil tank must line
up.
Remove the tank cap.
N
Filling Up with Chain Oil
Fill the tank with chain oil.
N
Take care not to spill chain oil while
refilling and do not overfill the tank.
STIHL recommends you use the STIHL
filler nozzle for chain oil (special
accessory).
Closing
Grip must be vertical:
Fit the cap – marks on tank cap and
N
oil tank must line up.
Press the cap down as far as stop.
N
English
13