Mounting Or Removing The Headrest - Vermeiren Altitude User Manual

EN
NL
3.4.4 Footrest length
The footrest (1) can be (dis)assembled without removal of the calf rest according to the
instructions below.
In the same way the footrest length can be adjusted (range 185 mm: step less).
CAUTION
When the footrest is adjusted to largest size, it will touch the ground
when the tilted seat is turned back to sitting position. Make sure the
footrest is turned to smallest size before tilting the seat.
Disassemble
1. Loosen clamping lever (4): Pull it up, turn it clockwise to place it to
a new position. Next, push it down on the bolt and turn it
anticlockwise to loosen the bolt.
2. Repeat this until the footrest support (1) is released. Now it can be
adjusted or removed.
Assemble/adjustment
1. Guide the footrest support (1) into the leg rest socket (2) behind
the calf rest plate (3).
2. Adjust length of the footrest support and fasten lever (4), in clockwise direction.
3. Make sure that the clamping lever (4) is firmly secured.
3.5

Mounting or removing the headrest

1. Make sure that the large edge of the headrest attachment is placed to the bottom.
2. Using the elastic band, mount the headrest to the desired position on the shell chair top.
3. Using the elastic band, remove the headrest from the shell chair.
Risk of damage
Altitude, Coraille, Altitude-E, Coraille-E
10
2020-09
Using the chair
3
2
4
1