Installing A New Bag - Whirlpool TF 4600 Series Use & Care Manual

Installing a new bag
Before installing a new bag, be sure:
1. The drawer side is securely locked.
2. The container is clean and free of sharp
debris fhat may have punctured the bag.
TU 8100 Model Series
Fit the bag caddy in the drawer. Tuck the
rope handles behind the bag retainers as
shown.
Put unopened bag in drawer as shown.
Spread front bag corners and slide cuff
over rioht-from corner.
Soread rear baa corners and slide cuff
over left rear coyner. Tuck cuffs behind bag
retainers as shown.
Press inside of bag against drawer
bottom, sides and corners for smooth fit.
TF 4600/TU 4100 Model Series
Put unopened bag in drawer as shown.
Spread front bag corners and slide cuff
over right-front corner.
rear bag corners and slide cuff
over left-rear corner.
Spread
Press inside of bag against drawer
bottom, sides and corners for smooth fit.
DO NOT USE ANY KIND OF BAG
OTHER THAN THOSE DESIGNED
ESPECIALLY FOR USE IN YOUR
COMPACTOR.
Compactor bags may be purchased
from the dealer from whom you purchased
your appliance, your lnglis Factory Direct
Service Branch, or the nearest Inglis-
authorized service organization. Ask for
part no. 675186.
1