Whirlpool GC900QPK Dimension Manual

®
Compactor
PRODUCT MODEL NUMBERS
GC900QPK TC800SPK
GC900QPL TU800SPK
GC900QPP TU800SPP
GX900QPL
GX900QPP
Electrical: 115-volt, 60-Hz, AC-only, 15- or
20-amp. grounded circuit is required. A time-delay
fuse or circuit breaker and separate circuit is
recommended.
CABINET OPENING DIMENSIONS
3"
(7.6 cm)
A
18" min.
(45.7 cm)
24" min.
(61 cm)
15 " min.
(38.7 cm)
CUSTOM PANELS
Flat panel
23 "
( 60.5 cm )
14 "
( 37.2 cm )
A 7/32 in. (5.6 mm) thick panel
is required. This is the same
thickness as a standard 1/4 in.
plywood or paneling.
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
OVERALL DIMENSIONS
34 " min.
(87 cm)
A. Grounded electrical outlet
must be a minimum of 3 in.
(7.6 cm) away from
surrounding cabinets or
nearby walls as shown. It
can be placed either to the
left or the right side of the
product.
With Trim Kit
Raised panel
14 "
( 37.2 cm )
"
( 5.6 mm )
A
B
"
( 8 mm )
both sides
A. Raised panel or decorative trim
B. Outer section of panel
The outer section of panel must be 7/32 in.
(5.6 mm) thick to fit into trim. Design raised
panel sections using dimensions shown above.
34 1 ⁄ "
8
(86.7 cm)
15"
(38.1 cm)
CLEARANCE DIMENSIONS
B
Models with handles
1 "
( 32 mm )
23 "
( 60.5 cm )
15"
( 38.1 cm )
"
( 8 mm )
Panel should be 1/2 to 5/8 in.
(13 to 16 mm) thick. NOTE: A
thicker panel may need rounded
front corners and a cutout for
access to the handle.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
24"
(61 cm)
A. Leave 6 in. (15.2 cm) of clearance
space to the right side of the
compactor in order to remove the
compactor bags.
B. Leave 23 in. (58.4 cm) of clearance
in front of the compactor in order to
fully open or remove the compactor
drawer.
A
Without Trim Kit
Models without handles
23 "
( 60.5 cm )
15"
( 38.1 cm )
Panel should be 1/2 in.
(13 mm) min. thickness
Ref. 9871676 Rev. C
25"
( 63.5 cm )
11-16-04