Usage For The Intended Purpose; Usage Not For The Intended Purpose; Warranty - Schaeffler OPTIME User Manual

Usage for the intended
Usage not for the intended
6 BA 68
Schaeffler OPTIME
The OPTIME condition monitoring system is approved for use
in indoor and outdoor industrial environments. The system may
purpose
only be used in accordance with the technical data, see page 76.
Unauthorised structural modifications to the system are not
permissible. We assume no liability for any damage to machinery
or injury to persons arising from such actions.
Usage for the intended purpose also includes the following:
all guidelines in the user manual are observed
compliance with all relevant specifications on occupational
safety and accident prevention during all life cycles of the system
the necessary specialist training and authorisation of your
company for carrying out the necessary work on the system.
The OPTIME condition monitoring system does not provide machine
protection. It must not be used as a component of safety systems.
purpose
For use in environments with an explosion risk, please note the
markings on the sensors (expected to be available from 06/2021).

Warranty

The manufacturer shall assume liability for warranties in relation
to operational security, reliability and performance only under
the following conditions:
Installation and connection must be carried out only by
authorised and skilled personnel.
The system must be used in accordance with the information
in the technical data sheets. The limit values indicated in the
technical data must not be exceeded under any circumstances.
Conversion and repair work on the system may only be carried out
by the manufacturer.
Schaeffler Technologies