Advertisement
1. FASTEN THE PROJECTOR MOUNT TO WALL
The bracket must be secured to the wall studs capable of at least
you find the center of the stud. Using at least two of the four lag bolts
3/16" (5mm) hole for lag bolts. Vertical and horizontal holes are provided to suite alternate mounting applications. fig.3 Shows wall mount application. fig 3b shows
ceiling mount application. Other hardware may be purchased from your local hardware supplier for hard surface mounting. Note: slide adjustment knob faces down
on the wall mount application.
Fig 3
Centerline of 2"x 4" wood
WALL MOUNT APPLICATION
2. ATTACH THE ADAPTER PLATE TO THE PROJECTOR.
Attach the adapter plate assembly to the projector
( screws L,M,O or P) (washers I or J )
NOTE: Do not over tighten the bracket mounting screws as damage to the projector's internal mounting threads could occur.
Fig 4
(5) times the weight of the projector + mount. Locate the wall or ceiling stud using a stud finder. Insure
( D )
½" Wall board
C
D
stud
Fig 4
( C )
and washers supplied
secure the mounting plate to the center of the studs. Pre drill
Fig 3b
½" Wall board
CEILING MOUNT APPLICATION
Using the proper hardware supplied
4
C
D
Centerline
of ceiling 2"x4" wood stud
Projector assembly
Advertisement
