Operation; Cleaning - Bosch MSM66 RU Series Instruction Manual

5 Release buttons
To remove the blender foot, press both
release buttons at the same time.
6 Blender foot
Plastic or metal (depending on model)
Attach the blender foot and lock into
position.
7 Blender blade
8 Blender jug with lid
Using the blender jug will prevent
the ingredients from splashing. Place
the lid on the blender jug to keep
processed food in it.
Depending on the model:
9 Universal cutter with lid
10 Whisk with gears
With the universal cutter, you can use the
appliance at full power. If the universal
cutter is not included with the hand blender,
it can be ordered from customer service
(order no. 657247).

Operation

The appliance is suitable for blending
mayonnaise, sauces, mixed drinks,
baby food, cooked fruit and vegetables.
For puréeing soups.
Use the universal cutter for cutting/chopping
raw food (onions, garlic, herbs, etc.)!
We recommend you use the blender
jug provided. However, other suitable
receptacles can also be used.
Caution!
The bottom of the receptacle you use must
not have any bumps or steps in it.
■ Clean all parts before using for the
first time.
X Fig. B
■ Completely unwind the mains cable.
■ Place the blender foot on the base unit
and lock into position.
■ Plug the mains plug into the mains.
■ Place the food in the blender jug or
another tall receptacle.
The appliance works better if there is some
liquid in the ingredients.
■ Set the required speed with the speed
control (Fig. B-5). It is recommended
using a low speed setting for liquids,
hot food and for mixing (e.g. muesli
into yoghurt). The high speed settings
are recommended for processing more
solid foods.
■ Firmly hold the hand blender and jug.
■ Switch on the hand blender by pressing
the required On button.
When switching on the hand blender, hold it
at a slight angle to prevent it from "sticking"
to the bottom of the blender jug. The hand
blender remains switched on as long as the
On button is pressed.
To prevent the ingredients from splashing,
do not press the On button until the blender
foot has been immersed in the ingredients.
Always switch off the hand blender before
taking it out of the ingredients.
■ Release the On button after processing.
After using the appliance:
■ Pull out the mains plug.
■ Press the release buttons and remove
the blender foot from the base unit.

Cleaning

The appliance must be thoroughly cleaned
after each use.
W Risk of electric shock
Never immerse the base unit in liquids and
do not clean in the dishwasher. Before
cleaning the appliance, pull out the mains
plug! Do not steam-clean the appliance!
Caution!
Surfaces may be damaged. Do not use
abrasive cleaning products.
Note: The plastic parts may become
discoloured when processing certain
ingredients such as red cabbage or carrots,
however this can be removed with a few
drops of cooking oil.
■ Pull out the mains plug!
■ Wipe the base unit with a damp cloth
and then wipe dry.
■ The blender jug and lid can be cleaned
in the dishwasher.
Operation en
5