Changing The Control Settings; Removing The Trivet - Whirlpool RT14DKXE Use And Care Manual

Changing the control settings
If you need to adjust temperatures in the
l
Adjust the Refrigerator Control first.
refrigerator or freezer, use the settings listed
l
Wait at least 24 hours between
in the chart below as a guide. If you have
questions, call us at l-800-447-6737.
adjustments.
l
Then adjust the Freezer Control if needed.
CONDITION:
Refrigerator
section
too warm
Freezer
section
too warm
RECOMMENDED
REASON:
CONTROL SETTINGS:
Refrigerator Freezer
l
Door opened often
l
Large amount of food added
4
C
l
Room temperature too warm
l
Door opened often
l
Large amount of food added
l
Very cold room temperature
3
A
(can't cycle often enough)
Refrigerator
section
too cold
Ice not
made fast
enough
Both sections
too warm
l
Controls not set correctly for
your conditions
l
Heavy ice usage
l
Very cold room temperature
(can't cycle often enough)
l
Door opened often
l
Large amount of food added
l
Very warm or very cold room
temperatures
2 6
3
A
4 6
Removing the trivet
(Model RTIQECRE)
To remove the trivet:
1. Lift the front of the trivet out of the
supports.
2. Pull the trivet out.
To replace the trivet:
1. Position the back of the trivet on the rear
wall supports.
2. Lower the trivet into place.
10
WITH OUESTIONS OR COMMENTS