Removing Crisper, Meat Drawer And Covers; Removing The Base Grille - Whirlpool RS22AMXV Care Manual

Using your refrigerator-freezer,
continued.
$~iI.st~g the refrigerator
Removing crisper, meat
.
drawer and covers.
heavy food items.
To remove glass shelf:
1, Remove food from shelf,
2. Tilt up front.
3. Lift up back until hooks clear the
shelf support slots.
4. PuIl shelf straight out. Be careful
- glass shelves are heavy!
To replace glass shelf:
1. Insert the rear hooks into the shelf
support
slots.
2. Tilt up front until hooks drop into
slot. Lower front of shelf to level
position.
Removing and adjusting the
freezer shelves.
To remove the shelf:
1. Remove food from shelf.
2. Lift right side of shelf off wall
supports.
3. Slide shelf out of supports.
4. Replace in reverse order.
To adjust the shelf:
1. Remove food from shelf; then
remove shelf.
2. Slide supports upward and remove.
3. Slide supports downward into new
position.
4. Replace shelf.
Note: The cup-shaped
the back of the freezer.
supports go in
I
To remove crisper and meat drawer:
1. Slide crisper or meat drawer
straight forward to the guide stops.
2. Lift the front until it clears stops
3. Slide crisper or meat drawer the'
rest of the way out.
4. Replace in reverse order.
To remove the covers;
2. Push up glass insert from the
bottom, then slide out with both
hands. (Be careful - the&s is
heavy!)
2. Lift front of cover frame and pull up
and out.
3. Repeat for meat drawer cover.
To replace covers:
1. Fit meat drawer cover notches into
supports on walIs of refrigerator.
Lower cover into place.
2. Repeat for crisper cover frame
3. Slide back of crisper cover glass
insert into place; then lower front.
Removing the base grille.
To remove:
1. Open the refrigerator and freezer
doors.
2. Pull grille outwards as shown.
3. Do Not remove Tech Sheet
fastened behind grille.
l-
metal clips
SUJYPOR
tabs
7
meta;
clips
\
SUPPort
tabs
To replace:
1. Line up grille support tabs with
metal clips
2. Push firmly to snap into position.
3. Close the doors.
Page 5