Setting Up The Device Via Wlan Network; Wlan Connection With The Radio - Busch-Jaeger Busch-AudioWorld 8216 U Busch-Radio iNet Product Manual

9.5

Setting up the device via WLAN network

9.5.1

WLAN connection with the radio

To set up your device with WLAN, carry out the following steps:
1. Switch the radio on.
– The device connects itself with the WLAN network.
2. Connect your PC or your tablet (again) with your network.
3. Open the browser and enter the IP address of the radio in the address line.
– Attention: This is not the IP address you entered during the initial setup.
– To display the IP address of the radio, switch to the main menu of the radio with the
"PROG" button and "On / Off"..
– Select menu level "Info" with the "PLUS / MINUS" buttons.
– Press the "PROG" button.
– Select menu level "IP address" with the "PLUS / MINUS" buttons.
– Here the IP address of the device is displayed.
4. After entering the IP address of the radio in the browser, the extended configuration menu is
displayed.
The WLAN setup is described in the following chapters.
Product manual 2CKA001473B8724
Operation
│53