Kingfisher 2525 Ownersmanual page 55

"Y" Valve Operation and Holding Tank Contents Disposal:
be pumped out via the deck fill. (See Hull Layout for waste pump out location and
ensure that the Flush Control Lever is set to open.) The "Y" Valve is located in the 28'
and 30' models, underneath the hinged step lid on the rear cabin step. On the 25' and
27" models, it is located behind the starboard side bilge door. On Pro series head
system the "Y" valve is located within the head box.
IMPORTANT: Be sure to check with local authorities or Coast Guard regarding state or
provincial overboard waste discharge regulations.
IMPORTANT: Take care not to allow any foreign object or materials to enter the waste
system
KINGFISHER
O W N E R ' S M A N U A L
w w w . k i n g f i s h e r b o a t s . c o m
52
28' / 30' Y Valve
Location
The "Y" Valve has
two
can
holding
contents overboard
by way of a thru-
hull
Layout for thru-hull
location). The valve
can
switched to allow
the holding tank to
CAUTION
Plastic parts may crack and the enamel
coating on the seat and lid may blister if
they come into contact with aggressive
chemical agents such as Acetone or
Bleach. Do not use abrasive pads on any
part of the toilet and do not use cream
cleaners on any part of the toilet except for
the toilet bowl.
functions. It
direct the
tank
(See Hull
also be