Kingfisher 2525 Ownersmanual page 35

Fuse Panel:
The fuse panel is located on the carpeted bulkhead underneath the dash.
A fuse panel label is located under the dash console. This label shows the location of the
fuses for each option.
When a fuse is suspected to be blown, the following procedure should be followed:

Turn off the component or appliance

Turn the battery switch to the off position

Locate and remove the blown fuse

Replace the blown fuse

Turn on the battery switch to the desired location

Turn on the component or appliance
IMPORTANT: If a fuse burns out continually, consult your authorized Kingfisher dealer.
NOTE: As part of the pre-trip safety check list, it is a good idea to make sure that there is
a selection of spare fuses on board that can be used in case of emergency.
KINGFISHER
O W N E R ' S M A N U A L
Example of a fuse panel layout
w w w . k i n g f i s h e r b o a t s . c o m
32