Panasonic ES‑LV64 Manual page 32

Problem
The shaving sensor
does not respond.
The shaving sensor
responds even
though the shaver is
not in contact with the
skin.
32
ES-LV64_CH.indb 32
Action
The shaving sensor may not
respond when the remaining
battery capacity is low. If this
happens, recharge the shaver.
Depending on the beard
thickness, the shaving
sensor may not react and the
driving sound may not
change. This is not abnormal.
Apply oil. The shaving
sensor may not respond
when there is not enough oil
on the blades.
Clean the beard trimmings
from the shaver.
When the shaver is
extremely dirty, remove the
foil frame and wash with
water.
(See page 29.)
Replace the system outer
foil and/or inner blades.
Expected life of system
outer foil and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Problem
The recommended
temperature for charging is
10 – 35 °C. If charged at a
The shaver cannot be temperature other than the
charged. recommended temperature,
the shaver may take longer
to charge or may not charge
at all.
Recommended ambient
temperature for operation is
5 – 35 °C. The shaver may
stop functioning when out of
Shaver stopped
recommended ambient
functioning.
temperature range.
The battery has reached the
end of its life.
While the shaving sensor
The driving sound lamp glows, the shaving
changes while sensor is operating. The
shaving. sound changes depending
on the beard thickness.
Press the power switch twice
The power will not
while using in the shaving
switch to OFF.
sensor mode.
If the problems still cannot be solved, contact the store
where you purchased the unit or a service center
authorised by Panasonic for repair.
Action
2014/03/26 15:05:16