ChargingTheShaver - Panasonic ES‑LV64 Manual

Using the lock ring
Use the lock ring to lock or unlock the power switch.
Rotate the lock ring until it clicks.
Rotate the lock ring to " " to unlock the
power switch:
Used when shaving, washing the shaver,
lubricating the shaver.
Rotate the lock ring to " " to lock the
power switch:
Used when carrying the shaver.
Charging the shaver
1
1
Insert the appliance plug into
the shaver.
• Turn the shaver off before
inserting.
2
2
Plug in the adaptor into a
household outlet.
• Check that the charge status
lamp ( ) glows.
• Charging is completed after approx. 1 hour.
The charging time may decrease depending on
the charging capacity.
• Wipe off any water droplets on the appliance
socket.
• Check that the outer foil is not deformed or
damaged when you are attaching the shaver.
ES-LV64_CH.indb 25
While charging
The charge status lamp
( ) glows.
The number of the battery
capacity lamp will increase
as charging progresses.
2
The charge status lamp ( ) will blink twice every second.
• Recommended ambient temperature for charging is
10 – 35 °C. It may take longer to charge or the battery may
1
fail to charge properly in extremely high or low temperatures.
Charge the shaver within the recommended ambient
temperature range.
• When charging the shaver for the first time or when it
has not been in use for more than 6 months,
charging time may change or the charging status lamp
( ) may not glow for a few minutes. It will eventually
glow if kept connected.
3
3
Disconnect the adaptor after charging is completed.
• Charging the battery for more than 1 hour will not
affect battery performance.
After charging is
completed
All the lamps will light up
and then turn off after
5 seconds.
Abnormal charging
the
25
2014/03/26 15:05:14