Pro Tools; Controls That Can Be Used With The Daw - Tascam 12 Manual

Pro Tools

The following screens are from Pro Tools12 Ultimate version
2019.12.
1.
Click "Setup" > "Peripherals..."
2.
Select the "MIDI Controllers" tab, and set the Type to "HUI".
3.
Set Receive From to "MIDIIN2 (Model 12 MIDI)".
On a Mac, set it to "Model 12 MIDI DAW Control IN".
4.
Set Send To to "MIDIOUT2 (Model 12 MIDI)".
On a Mac, set it to "Model 12 DAW Control OUT".
Making various DAW application settings
5.

Controls that can be used with the DAW

The following Model 12 controls can be used to operate the
DAW application.
o F2
o F2
o F3
o F4
o MULTI JOG dial (locate function)
o m/, buttons
o 8 button
o 7/9 button
o 0 button
o PAN knobs (1-6, 7/8-9/10)
o REC buttons (1-6, 7/8-9/10)
o MUTE switches (1-6, 7/8-9/10)
o SOLO switches (1-6, 7/8-9/10)
o Channel faders (1-6, 7/8-9/10)
ATTENTION
Click "OK".
The 8 button on the Model 12 will light, showing that
remote control is enabled.
button (DAW CONTROLLER MARKER screen)
button (DAW CONTROLLER TRACK screen)
button (DAW CONTROLLER TRACK screen)
button (DAW CONTROLLER TRACK screen)
Immediately after connecting with the DAW as well as after
settings have been made in the DAW, the DAW settings and
the state and positions of the Model 12 buttons, knobs and
faders will not match. In this case, adjust the DAW settings to
match the Model 12 settings, or use the Model 12 buttons,
knobs and faders to match the DAW settings.
TASCAM Model 12 DAW Controlmode Manual
9