Vermeiren B05 Manual

Option:
Adjustable armrest: B05
Some wheelchairs can be delivered with
adjustable armrests: B05. This option give an extra
adjustment: "height adjustment armpad".
1. Technical Specifications
Description
Range height armpad
Weight
2. Safety rules
L
Check that the height adjustment is firmly
secured before using the armrest.
3. Manner of delivery
Description Number
Adjustable 1
Armrest:
B05 - Left
Adjustable 1
Armrest:
B05 - Right
4. Assembly / Disassembly
Subject to technical alterations – vA - 2014-09
VERMEIREN
Opening up new horizons in mobility
Dimensions
80 mm
1,40 kg / piece
Drawing
The armrests of the wheelchair can be mounted by
following instructions:
1. Mount the rear tube of the armrest in tube hood

.
2. Make sure the armrest is mounted very well.
3. Fold the armrest forward.

4. Pull the lever on tube hood
5. Click the front tube of the armrest

hood .
To open and remove the armrest:

1. Pull lever and pull the front of the armrest
upwards.
2. Fold the armrest backwards.
3. To remove the armrest, pull the rear of the
armrest from tube hood
5. Adjusting height of armpad
Adjust the height of the armpad as follow:
1. Loosen the locking mechanism slightly by
turning the star knob Ⓐ anti-clockwise.
2. Pull on the locking pin Ⓐ.
3. Move the armpad, to adjust the height of the
armpad. Do this at the same time when pulling
on the locking pin Ⓐ.
4. Let go the locking pin Ⓐ.
5. Check that the locking pin Ⓐ is securely fixed.
6. Retighten the locking mechanism by turning the
star knob Ⓐ clockwise to reduce the play on
the armpad.
Be careful not to put your fingers, buckles, jewelry,
between the indicated entrapment zones ().

upwards.

in tube


.
The armpad of
your wheelchair
can be
adjusted in
height and
depth. The
height of the
armpad can be
adjusted in 5
positions
(range 80 mm
in steps from
20 mm).