Install The Keypad Lighting Assembly - T2 LUKE II Installation Manual

Luke II Keypad Lighting
®
11. Since the cast is an aluminum-alloy, it does not need the zinc-rich paint. However, a thin
coating of marine grease is recommended. Carefully apply the marine grease to the three
holes in the front cast using a Q-tip.

Install the Keypad Lighting Assembly

Tool Required

Phillips screwdriver
Parts

1x Keypad Lighting Module

1x Cable, Keypad Lighting

1x Diffuser, Keypad Lighting
T2 Systems, Inc. | T2systems.com
Installation Guide
5