Advertisement
Luke
II Keypad Lighting
®
6. On the inside of the door, use the cloth rag (or paper towels) to cover the keypad, coin inlet
chute, and coin sensor to prevent metal filings from dropping into the electronic components.
a. If the RFID option is present, temporarily disconnect the data cable if it's in your way.
7. Use the Door Inside drill template to mark the hole location to be drilled into the door.
8. Using the 1/2in bit, drill one hole into the door. You may want to drill a small pilot hole first to
guide the larger drill bit.
T2 Systems, Inc.
|
T2systems.com
Installation Guide
3
Advertisement
