Install Door Interlock System - GE EntelliGuard AKR30S-800A Installation Manual

Install Door Interlock System

• Ensure only qualified personnel install, operate, service, and maintain all electrical
equipment.
Details regarding installation of the door interlock system are shown below in Figure 44, 45 and 46.
Figure 44. AKD-8—Door Interlocking Components (Model 1)
•
Racking stroke of legacy = 4.25". Racking stroke of Retrofills = 2.75".
•
Racking stroke of the Retrofills is equal to that of AKR30S.
•
Same mounting bracket used for all AKR breakers in AKD8, depending on SKU the mounting holes are
decided on.
•
Provisions for fixing the door interlock are already present on the mounting bracket.
•
Door interlock system of AKR30S can be used for Retrofills.
•
Remove existing activator and replace with new activator shown.
•
For AKR30S, existing door interlock suffices. No changes needed.
EntelliGuard R Circuit Breaker Retrofill AKD-8 Installation Manual
52
• It must be ensured that the supply power
to the compartment is turned off/
compartment is de-energized for all the
incoming and outgoing circuits of the LVS
prior to any work being conducted on it.
•
During the installation and related work
on the equipment, it must be ensured
that the operator is using the prescribed
PPE for the specified tasks.
DEH41549 R05