Kenwood JKP250 Instructions Manual page 4

G
Children must not play with the appliance and
both appliance and cord must be out of
reach of children less than 8 years.
G
Only use the appliance for its intended domestic
use. Kenwood will not accept any liability if the
appliance is subject to improper use, or failure to
comply with these instructions.
before plugging in
G
Make sure your electricity supply is
the same as the one shown on the
underside of your kettle.
The JKP250 travel kettle is of class 1
construction and should only be
used in an EARTHED socket. Any
travel plug adapter used MUST
provide an earth connection.
G
WARNING: THIS APPLIANCE
MUST BE EARTHED.
G
This appliance conforms to EC
Regulation 1935/2004 on materials
and articles intended to come into
contact with food.
before using for the first time
G
Remove the cups and spoons from
the kettle.
G
Fill to 'MAX', boil, then pour the
water away. Repeat 2 to 3 times.
G
Wash the cups and spoons and then
dry.
key
hinged lid
lid release catch
on/off switch
indicator light
water level windows
cord clip
filter
2 cups
2 spoons
dual voltage selector
to use your travel jug
kettle
1 Remove the cups and spoons from
the kettle.
2 Select the required voltage by turning
the selector control
check that you have selected
the correct voltage before
using the kettle.
3 Fill the kettle through either the spout
or lid. To open the lid, pull back the
lid release catch
must be between 'MAX' and 1 cup
(200mls).
4
. Always
. The water level