Kenwood JKP250 Instructions

before using your Kenwood This appliance is not intended for
G
appliance use by persons (including children)
Read these instructions carefully with reduced physical, sensory or
G
and retain for future reference. mental capabilities, or lack of
G Remove all packaging and any experience and knowledge, unless
labels. they have been given supervision or
instruction concerning use of the
safety
appliance by a person responsible
for their safety.
Your kettle has a dual voltage
G
G Children should be supervised to
selector on the underside
ensure that they do not play with
of the kettle. Always check
the appliance.
that you have selected the
G Only use the appliance for its intended
correct voltage before using
domestic use. Kenwood will not
the kettle.
accept any liability if the appliance is
Always use the filter and never
G
subject to improper use, or failure to
overfill - boiling water may splash
comply with these instructions.
out.
before plugging in
Avoid contact with steam coming
G
Make sure your electricity supply is
G
out of the spout area when pouring
the same as the one shown on the
and out of the lid or spout area
underside of your kettle.
when refilling.
The JKP250 travel kettle is of class
G Never let the cord hang down
1 construction and should only be
where a child could grab it.
used in an EARTHED socket. Any
G Always unplug your kettle
travel plug adapter used MUST
when not in use.
provide an earth connection.
Never put the kettle, cord or plug in
G
Important - UK only
liquid.
Never use a damaged appliance. G The wires in the cord are coloured
G
Get it checked or repaired: see as follows:
Green and Yellow = Earth
'service and customer care'.
Caution: Do not operate the kettle Blue = Neutral
G
Brown = Live.
on an inclined surface.
The appliance must be protected
G Make sure the lid is secure before G
switching the kettle on. by a 13A approved (BS1362) fuse.
WARNING: THIS APPLIANCE
G Warning: Do not open the lid while G
the water is boiling. MUST BE EARTHED.
Take care when opening the lid -
G
Note:
droplets of hot water may be
ejected. G For non-rewireable plugs the fuse
Make sure the kettle is switched off cover MUST be refitted when
G
replacing the fuse. If the fuse cover
before lifting or pouring.
Unplug the kettle before filling or is lost then the plug must not be
G
pouring. used until a replacement can be
obtained. The correct fuse cover is
G Never put the kettle near or on
cooker hot plates or gas burners. identified by colour and a
replacement may be obtained from
G This kettle is for boiling water only.
your Kenwood Authorised Repairer
(see Service).
If a non-rewireable plug is cut off it
G
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
This appliance conforms to EC If you experience problems
G G
directive 2004/108/EC on with your kettle switching on
Electromagnetic Compatibility and and off during use or
EC regulation no. 1935/2004 of switching off before boiling,
27/10/2004 on materials intended check that the flat element
for contact with food. is free from scale - see
"descaling".
before using for the first
Take care when using the cups
G
time
and do not overfill above the inner
G Remove the cups and spoons from
rim (approx. 200mls).
the kettle.
Your kettle is fitted with a filter to
G
Fill to 'MAX', boil, then pour the
G
hold back limescale particles.
water away. Repeat 2 to 3 times.
G If you find drops of water under
Wash the cups and spoons and
G
your kettle, don't worry - it is just
then dry.
condensation.
key
boil-dry protection
If you switch on with too little
G
hinged lid
water, your kettle will cut out
lid release catch
automatically. Switch off, unplug
on/off switch
and let it cool down before re-
indicator light
filling. When it has cooled down,
water level windows
the switch will reset itself.
cord clip
filter
care and cleaning
2 cups
2 spoons
Before cleaning, unplug your kettle
G
dual voltage selector
and let it cool down.
The cups and spoons can be
G
to use your travel jug
placed in the kettle for compact
kettle
storage.
Wrap the cord around the kettle
G
1 Remove the cups and spoons from
and secure using the cord clip
the kettle.
the outside
2 Select the required voltage by
G Wipe with a damp cloth, then dry.
turning the selector control .
Do not use abrasives - they will
Always check that you have
scratch the plastic surfaces.
selected the correct voltage
the inside
before using the kettle.
Even though your kettle comes
G
3 Fill the kettle through either the
with a filter, you still need to clean
spout or lid. To open the lid, pull
the inside (and the filter) regularly.
back the lid release catch . The
water level must be between
the filter
'MAX' and 1 cup (200mls).
1 To open the lid, pull back the lid
Be economical: do not boil more
G release catch
water than you need.
2 Unclip and slide out the filter
G To improve the quality of your
3 either rinse under the tap or use
drinks always use fresh water.
a soft brush.
G Empty the kettle after each use.
or when descaling your kettle,
4 Check the lid is closed.
drop the filter in too. Rinse
5 Plug in and switch on. The
thoroughly.
indicator light will come on.
4 Replace the filter by locating the
6 Your kettle will boil and switch off
front of the filter into the spout area
automatically. To re-boil, wait a few
and then clip into place
seconds - the on/off switch needs
time to reset.
.
.
.
.