Wireless kit for fdk series (fdk22~56, fdk71) (9 pages)
Summary of Contents for Mitsubishi Electric SPTB1
Page 1
MANUFACTURED FOR: MITSUBISHI ELECTRIC US, INC. Separate Power Terminal Block Kit SPTB1 INSTALLATION MANUAL FOR INSTALLER English For safe and correct use, please read this operation manual thoroughly before operating the air-conditioner unit.
Power Terminal Block for Mitsubishi Electric M&P series air The installer will still need to run S2 and S3 wires from the conditioners. The SPTB1 will allow for a separate power supply to outdoor unit to the indoor unit. See Wiring Schematic section of this the indoor unit rather than receiving power from the outdoor unit.
Wiring Harness for Power provided in the SPTB1 kit. Step. 3 Control box for M&P series air handler.
Page 6
Step. 7 New parts from SPTB1 kit. (4) parts. Terminal block, screw, Step. 10 Plug the connector from the Power Wiring Harness into power wiring harness and communication wiring harness. CND. Connect the ground to the screw removed earlier and then connect the blue wire to “L1”...