EUROM Vento Series Instruction Leaflet page 12

12
By pressing a second time you switch the fan into sleep mode, so that after half an hour the fan
will switch from extra fast to fast, and once again after half an hour to normal speed. It will
maintain this setting for the rest of the night.
.
4. Timer
You can use this button to set a timer. 1 push is 1 hour, 2 pushes = 2 hours etc., up to 7 hours.
8 pushes = switch timer off. After the set time has elapsed the fan will switch off automatically.
5. Oscillating button
Push this button to turn the oscillation function on or off. Make sure that hair, clothes, curtains
etc. cannot be sucked into the spinning fan!
A light in the button indicates which function is selected.
Remote Control
The Vento16S has a remote control. Once the fan is switched on with the on/off-button then you
can use the remote control, which also has buttons 2, 3, 4, and 5, to operate it with. Switch the
fan off again with the on/off switch on the fan.