Changing The Control Settings - Whirlpool EDZZDK Use And Care Manual

Changing the control settings
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide. If you have questions, call our
Consumer Assistance Center number. (See
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments
l
Then adjust the Freezer Control if needed.
page 21.)
RECOMMENDED
CONDITION: REASON:
CONTROL SEll-INGS:
If Refngerator
Section is
TOO WARM
Door opened often
Large amount of food added
Room temperature too warm
Refrigerator
4
Freezer
A
If Freezer
Section is
TOO WARM
Door opened often
Large amount of food added
Very cold room temperature
(can't cycle often enough)
Refrigerator
Freezer
If Refrigerator
Section is
TOO COLD
Controls not set correctly
Refrigerator
2
for your conditions
Freezer
B
If ICE isn't
MADE FAST
ENOUGH
If BOTH
SECTIONS
are TOO WARM
Heavy ice usage
Very cold room temperature
(can't cycle often enough)
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator
Freezer z
Refrigerator
4
Freezer B
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you
use your refrigerator. Glass shelves are strong
enough to hold bottles, milk and other heavy food
items.
To remove glass shelves:
1. Remove items from shelf.
2. Slide shelf out with an even, constant pull.
3. Lift front and slide the rest of the way out.
To move shelf guides to a new position:
1. Lift front of guide. Pull guide forward off rear
support. Repeat for other guide.
2. To replace guide, push guide onto rear
support. Push front of guide down onto
support.
To replace glass shelves:
I. Guide rear of shelf into shelf guide.
2. Slide shelf into place.
Be careful when
handling glass items.