Download
Share
Print this page
RSi Smartcanopy EVO Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. RSi Smartcanopy Manuals
  4. Automobile Accessories
  5. EVO
  6. Assembly instructions manual

RSi Smartcanopy EVO Assembly Instructions Manual

Toyota hilux double cab
Hide thumbs Also See for EVO:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
ASSEMBLY INSTRUCTIONS
TOYOTA HILUX DOUBLE CAB
PLEASE ENSURE TO READ ASSEMBLY INSTRUCTIONS CAREFULLY
BEFORE ATTEMPTING TO ASSEMBLE.
LIKE SHARE FOLLOW

Advertisement

loading

Related Manuals for RSi Smartcanopy EVO

Summary of Contents for RSi Smartcanopy EVO

  • Page 1 ASSEMBLY INSTRUCTIONS TOYOTA HILUX DOUBLE CAB PLEASE ENSURE TO READ ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE. LIKE SHARE FOLLOW...
  • Page 2 ASSEMBLY KIT CONTENTS ASSEMBLY KIT CONTENT (HARDWARE) DESCRIPTION EXAMPLE M6 Button Head Screw / End Caps 4 / 4 M6 X 12 Hex Bolt Nyloc Nut M6 M6 Fastener Block M6 X 25 M6 Flat Washer Sealer Foam Load Spreader Plates ASSEMBLY KIT CONTENT (COMPONENTS) DESCRIPTION EXAMPLE...

  • Page 3: Warning Labels

    WARNING LABELS Ensure that only the recommended tools are used during the assembly procedure of the RSI SMARTCANOPY to avoid damaging the RSI SMARTCANOPY. Take note to the symbols indicating possible safety hazards during assembly and to use the relevant personal protective equipment and safety measures as indicated.
  • Page 4 2. ONLY USE THE HARDW ARE PROVIDED IN THE ASSEMBLY KIT OUTLINED ON THE PAGE BEFORE 3. HANDLE ALL RSI SMARTCANOPY COMPONENTS WITH CARE UPON UNPACKING 4. TO AVOID SCRATCHING DO NOT PLACE RSI SMARTCANOPY COMPONENTS ON A ROUGH SURFACE 5. NEVER USE ACETONE ON PAINTWORK STEP 1.
  • Page 5 1. PLACE THE ROOF UPSIDE DOWN ON A PROTECTED SURFACE TO PREVENT DAMAGING THE PAINT. 2. LOCATE BOTH SIDE PANELS AND PLACE THEM EITHER SIDE OF THE ROOF AS INDICATED (PLEASE NOTE THAT THE BLUE STICKERS MUST BE ORIENTATED TO THE ONE SIDE OF THE RSI SMARTCANOPY AND THE THREE RED STICKERS TO THE OTHER.
  • Page 6 ASSEMBLY OF THE RSI SMARTCANOPY 1. ALIGN THE FRONT END TO THE SIDE PANELS AND ROOF ASSEMBLY, THE FL, FR RED ORIENTATION STICKERS SHOULD BE ON THE SAME SIDE. USING THE M6 FASTENER BLOCKS AND ITS RELATIVE STEP FASTENERS, BOLT THE FRONT FLANGE TO THE SIDE PANEL AND ROOF. TIGHTEN SUFFICIENTLY.
  • Page 7 ASSEMBLY OF THE RSI SMARTCANOPY STEP 1. BOLT THE SIDE PANELS TO THE REAR FLANGE USING THE CORRECT FASTENERS. ENSURE THE REAR FLANGE SLIDE OVER THE SIDE PANELS SEVEN USE 2X M6X12 BUTTON HEAD SCREWS, 4X M6 FLAT WASHERS AND 2X M6 NYLOC NUTS.
  • Page 8 EIGHT RUBBER ONTO THE RSI SMARTCANOPY FOLLOWING THE EDGE ALL THE WAY ROUND. When sticking the rubber on the front part of the canopy, when edges start to lift, stick it back down to the canopy using a very small amount of glue...
  • Page 9 ASSEMBLY OF THE RSI SMARTCANOPY STEP 5. CUT THE OVERHANG ON THE D-RUBBER SHORTER, BE SURE TO LEAVE SOME OVER HANG IN ORDER EIGHT TO HELP SEAL THE REAR. THANK YOU FOR PURCHASING A RSI SMARTCANOPY. SHOULD YOU HAVE ANY ENQUIRIES ABOUT THE ASSEMBLY, FEEL FREE TO CONTACT US...