Using Guide - Samsung The Serif 108 cm E-Manual

Using Guide

Provides a summary of each channel's programming schedule.
To find out information about programs on other channels while watching a broadcast, press Samsung Smart
Remote's the (channel) button. Use the directional buttons to see the broadcast information.
Live TV Guide
See each broadcaster's programming schedule for the day and detailed information about each program. You can
also schedule a recording or viewing of an upcoming program.
Voice-recognition is also available for Guide. Long-press Samsung Smart Remote's
Depending on the model or region, this feature may not be supported.
Guide's information display is available for digital channels only. Analog channels are not supported.
Guide is not available if
Manager Time
Reconfigure the clock as follows:
1. Press button to launch
2. Press the left button until
Press the Select button to launch the TV's
3.
4. Use the up and down buttons to highlight
5. Use the up and down buttons again to highlight
Highlight Time and press the Select button.
6.
Highlight Clock and press the Select button.
7.
8. Highlight Clock Mode
If Manual has been selected, you can open the
When opened, Guide will display a table showing the programming schedule of each channel.
time are shown on the top row. Each row has the name of the channel on the left and the channel's programming
schedule to the right of the name.
While using Guide, use the up and down buttons to select a channel and then the left and right buttons to select a
program.
Alternatively, you can press
to that channel. Press the
Once you navigate to a program, you will be able to hear detailed information about that program. If you select a
different channel, the TV will tell you the channel name, channel number, and detailed information about the
programs. If you move to a different date, the TV will tell you the date of the first program on that date. If you did
not hear the date, you can move 24 hours backwards or forwards to hear the date.
Clock has not been set. Configure
Clock)
Smart Hub.
Settings is highlighted.
and press the Select button to choose between
or to load the on-screen numeric keypad to enter a channel number and switch
button to move to the current program.
Clock first. (
Settings menu.
General and press the Select button.
System Manager
Date and Time settings to configure the date or time manually.
- 188 -
button and then say "Guide."
or Settings General
and press the Select button.
Auto and Manual.
System
Filter By : All and the