Advertisement
Micromatic LLC
525 Berne St
Berne, IN 46711
1-260-589-2136 x3211
customerservice@micromaticllc.com
TIPPER MOUNTING OPTIONS
The standard tipper base mounting plate is equipped with one mounting pattern:
MAINTENANCE
Lubrication
➢ Pivot joints are equipped with six (6) easy access grease zerk fittings.
➢ Main pivot joints should be greased monthly to flush contaminates from pivot joint.
Inspection Prior to Each Use
➢ Fasteners should be inspected to ensure all are in place and tight – See Torques below.
➢ Stop bolts serve a functional purpose to limit the rotation of the actuator. Make sure they
are in place and do NOT remove them.
➢ Inspect all welds for cracks and repair or replace as necessary.
➢ Hydraulic oil and oil filter on the waste truck should be checked periodically and changed
according to the manufacturer-recommended intervals.
26-18-1006 rev.-
Page 8 of 10
RotacTippers.com
Model: LONG ARM
Advertisement
