Scantron SelfScore Operator's Manual page 78

68
Sheets (part number 202-171-989) into the input tray
so that the words "Scantron Reflective" are on top and
enter the scanner first.
Press Start to perform the test. The scanner scans the
sheets. If the scanner passes the test, the following
menu item appears.
Press Next to advance to the next menu item.
If the scanner fails the test, the following three menu
items appear.
Where x =
• Paper
• Light Mark
• Dark Mark
and y = hex value (0-9 and A-F)
If the scanner fails the test, first ensure that the
calibration sheets are not dirty or damaged. If they are
not, clean the scanner read head, then retest by
pressing Retry. If the scanner still fails the test after
these measures, contact Scantron Customer Support
as described in "Chapter 9: Product Support and
Services" on page 97.
Press Next to exit the test and to advance to the next
Scantron SelfScore Scanners