Scantron SelfScore Operator's Manual page 75

Print Offset
Variables
Where <Position #>=
• Whole numbers from +10 to -10
Description
This menu item allows you to adjust the printer offset.
Printer offset helps ensure that the error marks or
answer verification marks are printed next to the
question.
Press Next to advance to the next menu item.
Press Change to increment the printer offset by one.
Each time you press Change, the offset indicator
number increments by 1 up to +10, then it resets to -10.
Continue pressing Change until you have reached the
setting that you want to test. Once you have chosen a
setting, score a test to determine if the alignment is
correct. Readjust as necessary.
NOTE: The default setting for print offset is 00.
Operator's Guide 65