Default Config - Set
60
The following describes how to configure the
communications parameters.
Press Run to enter a submenu that allows you to
display communications parameters, set the
communications parameters to the factory default or
to a custom configuration. The following menu items
appear.
Variables
Where <Scanner Model>=
•
SelfScore
Description
This menu item allows you to set the communications
parameters to the factory default. The factory default
configuration is:
•
Start Record 1 = FF
•
Start Record 2 = FF
•
Start Record 3 = FF
•
Start Record 4 = FF
•
Start Record 5 = FF
•
Start Record 6 = FF
•
End Record 1 = 0D
•
End Record 2 = 0A
•
End Record 3 = FF
•
End Record 4 = FF
•
End Record 5 = FF
•
End Record 6 = FF
Scantron SelfScore Scanners