Siemens C16 Series Instruction Set Manual page 107

SRST
Syntax
Operation
Description
Condition Flags
Addressing Modes
Semiconductor Group
30Mar98@15:00h
Software Reset
SRST
Software Reset
This instruction is used to perform a software reset. A software reset has
the same effect on the microcontroller as an externally applied hardware
reset. To insure that this instruction is not accidentally executed, it is
implemented as a protected instruction.
E Z
0 0
E Always cleared.
Z Always cleared.
V Always cleared.
C Always cleared.
N Always cleared.
Mnemonic
SRST
C166 Family Instruction Set
V C N
0 0 0
Format
B7 48 B7 B7
107
Instruction Description
SRST
Version 1.2, 12.97
Bytes
4