Adjusting The Door Bins; Adjusting The Refrigerator Shelves - Whirlpool 3VED23DQDW00 Use And Care Manual

Adjusting the door bins
(on some models)
To remove door bins:
1. Lift bin up.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support
button.
2. Push down until it stops.
Adjusting the refrigerator shelves
Adjust the shelves to match the way you
use your refrigerator. Glass shelves are
strong enough to hold bottles, milk, and
other heavy food items.
To remove a shelf:
1. Remove items from shelf.
2. Tilt shelf up at front.
3. Lift shelf at back.
4.
Pull shelf straight out.
To replace a shelf:
1. Guide the rear shelf hooks into the
slots in the shelf supports on the back
liner wall.
2. Tilt front of shelf up until hooks drop
into slots.
3. Lower front of shelf to a level position.
NOTE: Glass shelves are heavy. Handle
them carefully.
To slide shelf out (on some models):
l
Carefully pull front of shelf toward you.
To slide shelf in (on some models):
l
Push shelf in until it stops.
Wire shelves
Glass shelves