Table of Contents
Advertisement
Removing
the Doors
Please
read these
helpful
hints
before
you start
l
Before you start, either unplug the
refrigerator or disconnect the electricity
leading to it at the main power supply
and remove any food from door
shelves.
Cabinet
l
When removing hinges, keep doors
closed until ready to lift free from
cabinet.
l
To remove doors, start at the top hinge
and work down.
l
To replace doors, start at the bottom
hinge and work up.
l
Line up doors so they are centered
between the sides of the cabinet and
are parallel with each other.
l
If refrigerator light does not go out
when door is closed, the door may be
too low. Use a thicker spacer if
necessary.
l
Door seal may be adjusted by removing
the top hinge and adding or removing
shims to the bottom hinge.
l
Set the door gap at 17.5 mm (l% inch).
The diameter of a dime is about right.
See figure.
l
The refrigerator must be level and
sitting on a solid floor.
8
mm (YE")
Countersink
Oval sealing
Handle
hex-head
handle
screw
Oval sealing
hinge screw
screw
(use on bot-
screw
screw (use
toms of doors)
on tops of
doors)
27
Advertisement
Table of Contents
