Ryobi Dual Clean RPW105DM Operator's Manual
  1. Manuals
  2. Brands
  3. Ryobi Manuals
  4. Pressure Washer
  5. Dual Clean RPW105DM
  6. Operator's manual

Ryobi Dual Clean RPW105DM Operator's Manual

Dual clean
Hide thumbs

Advertisement

Table of Contents

RPW105DM
Dual Clean™ PRESSURE WASHER
OPERATOR'S MANUAL
Important!
To reduce the risk of injury, the user must read and understand the operator's manual
before using this product.
Thank you for your purchase.
(Original Instructions)

Advertisement

Table of Contents
loading

Related Manuals for Ryobi Dual Clean RPW105DM

Summary of Contents for Ryobi Dual Clean RPW105DM

  • Page 1 RPW105DM Dual Clean™ PRESSURE WASHER OPERATOR’S MANUAL (Original Instructions) Important! To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for your purchase.

  • Page 2: Important Safety Instructions

    ENGLISH(Original Instructions) INTRODUCTION The electric supply connection shall be made by a qualified electrician and comply with IEC60364-1. This product has many features for making its use o Only connect this machine only to a supply circuit more pleasant and enjoyable. Safety, performance, and protected by a residual current device (RCD) with a dependability have been given top priority in the design tripping current of not more than 30mA.
  • Page 3 ENGLISH(Original Instructions) Keep the motor away from flammables and other Never leave product running unattended. Turn hazardous materials. power off. Don’t leave product until it comes to a complete stop. Check bolts and nuts for looseness before each use. A loose bolt or nut may cause serious motor Keep the motor free of grass, leaves, or grease to problems.
  • Page 4 ENGLISH(Original Instructions) SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Safety Alert Indicates a potential personal injury hazard.
  • Page 5 Do not operate this product on direct current and instructions in the operator’s manual, do (DC). A substantial voltage drop will cause a loss of not use this product. Call Ryobi customer power and the motor will overheat. If the product does service for assistance.

  • Page 6: Specifications

    ENGLISH(Original Instructions) WARNING: Check extension cords before each use. If damaged replace immediately. Never use the product with a damaged cord since touching the damaged area could cause electrical shock resulting in serious injury. SPECIFICATIONS Description Unit RPW105DM Rated Voltage V~/Hz 220-240V/50Hz Rated Pressure...

  • Page 7: Assembling The Lance

    Slide the collar over the coupler turning the collar clock wise to tighten securely. If in doubt, call Ryobi Customer Service for assistance. Pull on the hose to be certain it is properly secured. Operation of a product that may have been improperly preassembled could result in serious personal injury.

  • Page 8: Operation

    ENGLISH(Original Instructions) Insert the lance Quick Connect coupler into the CAUTION: clean ing deck inlet plug. Tilt upwards until coupler When connecting the appliance to the water clips into position. supply mains (not public drinking water supply mains), please observe the local regulations of WARNING: local boards or local water supplier.

  • Page 9: Operating The Pressure Washer

    ENGLISH(Original Instructions) After ensuring the switch is in the OFF position, Engage the lock out on the gun by pushing down on connect the pressure washer to the power supply. the lock out until it clicks into the slot. Press ON ( I ) on the switch to start the motor. Remove the nozzle by placing hand over nozzle then pulling back the Quick Connect collar.

  • Page 10: General Maintenance

    ENGLISH(Original Instructions) MAINTENANCE CLEANING THE DECK NOZZLES See Figure 13. There are two deck nozzles located under the cleaning WARNING: deck. If these nozzles become clogged, it may be When servicing, use only identical replacement necessary to clean them. parts. Use of any other parts may create a hazard To clean nozzles: or cause product damage.

  • Page 11: Troubleshooting

    ENGLISH(Original Instructions) TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Power cord not Connect the power cord to a live 220-240V AC, 50 Hz AC socket. connected to power Pressure source washer does not Switch is off Turn switch on. start when trigger is House circuit breaker is Reset house breaker.

  • Page 12: Limited Warranty

    LIABILITY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID BY YOU FOR THE PRODUCT. This warranty is valid only in the European Union, Australia and New Zealand. Outside these areas, please contact your author- ized Ryobi dealer to determine if another warranty applies.
  • Page 13 Marlow, Bucks Building B, Rosehill Industrial Estate, SL7 1TB - United Kingdom 3 Shirley Street, Rosehill NSW 2142 RYOBI TECHNOLOGIES (UK) LIMITED Australia Medina House, Field House Lane, Tel: (02) 8892 1800 or 1300 361 505 Marlow, Bucks Fax: 1800 807 993...

Table of Contents