Table of Contents
Advertisement
Shooting results
In magnified view, the shutter speed and aperture value will be displayed in orange.
If you take the picture in magnified view, the exposure may not come out as
desired. Return to the normal view before taking the picture.
Even if you take the picture in magnified view, the image will be captured with the
image area of the normal view.
Images and display
Under low- or bright-light conditions, the displayed image may not reflect the
brightness of the captured image.
Although noise may be noticeable in images under low light (even at low ISO
speeds), there will be less noise in your shots, due to differences in image quality
between displayed and captured images.
The screen or exposure value may flicker if the light source (lighting) changes. In
this case, stop shooting temporarily and resume under the light source you will use.
Pointing the camera at different direction may momentarily prevent correct display
of brightness. Wait until the brightness level stabilizes before shooting.
If there is a very bright light source in the image, the bright area may appear black
on the screen. However, the actual captured image will correctly show the bright
area.
Under low light, bright [ : Screen brightness] or [ : Viewfinder brightness]
settings may cause noise or irregular colors in images. However, the noise or
irregular colors will not be recorded in the captured image.
When you magnify the image, the image sharpness may look more pronounced
than in the actual image.
Custom Functions
Some Custom Functions are not available (some settings have no effect).
Lens
Image Stabilizer is active all times, even without the shutter button pressed
halfway, when you use an EF-M lens with [IS mode] in [
mode] set to [On], or an EF or EF-S lens with the lens Image Stabilizer switch set
to <
>.
The Image Stabilizer consumes battery power and may decrease the number of
available shots depending on the shooting conditions. When the Image Stabilizer is
not necessary, such as when using a tripod, it is recommended that you set the
Image Stabilizer switch to <
With EF lenses, focus preset during shooting is only available when using (super)
telephoto lenses equipped with this function released in and after the second half of
2011.
Note
You can display images on a television by using a commercially available HDMI
cable (not exceeding 2.5 m/8.2 ft., with a Type D terminal on the camera end,
Note that no sound will be output.
>.
291
: IS (Image Stabilizer)
).
Advertisement
Table of Contents
