Canon EOS M50 Mark II Advanced User's Manual page 172

3.
Take the picture.
Shooting tips
In bright light, decrease the ISO speed.
If the exposure setting in the viewfinder blinks, decrease the ISO speed.
Detach the lens hood. Do not get too close to the subject.
If the lens has a hood attached or you are too close to the subject, the bottom of the
picture may look dark due to the obstructed flash light. For important shots, play back
the image and check to make sure the picture does not look unnaturally dark at the
bottom part.
Shutter Speed and Aperture Value in Flash Photography
Shooting Mode
* With [Slow synchro] in [
Caution
Do not use the built-in flash unless it is fully raised.
When focus is achieved and you press the shutter button completely,
the flash will fire at all times.
To retract the built-in flash after shooting, push it down with your fingers
until it clicks into place.
Shutter Speed
Auto (1/200–30 sec.)*
Manual (1/200–30 sec.)
Auto (1/200–30 sec.)*
Manual (1/200–30 sec., Bulb)
: Flash control] set to [1/200-30sec. auto]
172
Aperture Value
Automatically set
Automatically set
Manually set
Manually set