Table of Contents
Advertisement
Metering Mode
Four methods (metering modes) to measure the subject's brightness are provided. Normally,
evaluative metering is recommended. Evaluative metering is set automatically in Basic Zone
modes (except in <
1.
Select [
2.
Select an option.
: Evaluative metering
General-purpose metering mode suited even for backlit subjects. The camera adjusts
the exposure automatically to suit the scene.
: Partial metering
Effective where there are much brighter lights around the subject due to backlight, etc.
Covers approx. 5.8% of the area at the center of the screen. The partial metering area is
indicated on the screen.
: Spot metering
Effective when metering a specific part of the subject. Covers approx. 2.9% of the area
at the center of the screen. The spot metering area is indicated on the screen.
:
> mode, which uses center-weighted average metering).
: Metering mode].
164
Advertisement
Table of Contents
