Table of Contents
Advertisement
exp. comp.
Set the flash exposure compensation if the brightness of the subject does not come out as
desired (so you want to adjust the flash output) in flash photography. You can set the flash
exposure compensation up to ±2 stops in 1/3-stop increments.
1.
Select [
2.
Set the compensation amount.
exp. comp.].
If the exposure is too dark, press the <
exposure).
If the exposure is too bright, press the <
exposure).
After taking the picture, cancel the flash exposure compensation by
setting it back to 0.
> key (for increased
185
> key (for decreased
Advertisement
Table of Contents
