Table of Contents
Advertisement
1.3 Safety
Installation of products in pits must be carried out by
specially trained persons.
Work in or near pits must be carried out according to
local regulations.
DANGER
Electric shock
Death or serious personal injury
- It must be possible to lock the main switch in
position 0. Type and requirements as specified in
local regulations.
Persons must not enter the installation area when the
atmosphere is explosive.
For safety reasons, all work in pits must be supervised by a
person outside the pit.
We recommend that you carry out all maintenance
and service work when the product is placed outside
the pit.
Pits for submerged sewage and wastewater products may contain
sewage or wastewater with toxic and/or disease-causing
substances. Therefore all persons involved must wear
appropriate personal protective equipment and clothing, and all
work on and near the product must be carried out under strict
observance of hygienic regulations in force.
DANGER
Crushing hazard
Death or serious personal injury
- Always lift the product by its lifting bracket or by
means of a forklift truck if the product is on a pallet.
Do not lift the product by the power cable.
4
2. Preparing the dismantling of the product
2.1 Transporting the product
Transport the product in horizontal position. Make sure the
product cannot roll of fall over.
See the installation and operating instructions for mixers, type
AMG (96498078). Use the QR code and the link on the front of
this document.
2.2 Contaminated products
See the installation and operating instructions for mixers, type
AMG (96498078). Use the QR code and the link on the front of
this document.
2.3 Handling and storing the product
2.3.1 Handling the product
The product weights between 78 and 280 kg with motor bracket
and 10 m cable. It is therefore important to use the correct lifting
equipment. The product weight is stated on the nameplate.
Make sure that all lifting equipment is rated for the
purpose.
Check the lifting equipment for damage before
attempting to lift the components.
DANGER
Crushing hazard
Death or serious personal injury
- Always lift the product by its lifting bracket or by
means of a forklift truck if the product is on a pallet.
Do not lift the product by the power cable.
Do not lift the product by the power cable. It may
result in electric short circuit and risk of shock when
the product is connected to the mains. The cable and
cable entry my be damaged, leading to loss of
watertightness and consequent severe damage to
the motor.
2.3.2 Storing the product
See the installation and operating instructions for mixers, type
AMG (96498078). Use the QR code and the link on the front of
this document.
Advertisement
Table of Contents
