Table of Contents
Advertisement
Available languages
Available languages
Changing a programme with resetting
If you would like to cancel a program while a washing program is resumed.
Discharge process starts after closing the door of the machine. The
machine discharges the water in it for about 30 seconds. When the
program is cancelled, your machine gives a buzzer sound for "5 times"
and the "end of program indicator" turns on.
Note: When the door of the machine is opened in order to stop the washing program before
it is completed first open the door slightly in order to avoid water spillage.
Switching the machine off
When end of the program indicator turns on, switch your
machine off by using the Power On/Off button.
Note: After the buzzer sound which indicates the end of the program when the washing program
comes to an end (end indicator light is on), you can leave the door of your machine ajar in order
to hasten the drying.
Note: If the machine door opens during washing or the power is cut off, the machine will go on to
the program in case the door is shut or the power is back.
Note: If energy is cut or machine door is opened during drying process, program is terminated.
Your machine becomes ready for new program selection.
46
F1
F2
F3
Keep the program selection button pressed for
3 seconds. (End of program indicator flashes and
program light turns off)
1
2
3
4
65
C
50
C
40
C
0
0
0
intensive
economic
quick
prewash
Pull the plug out of the outlet. Turn of the water tap.
F4
program
F1
F2
F3
salt
rinse aid
end
salt
F4
rinse aid
program
end
Advertisement
Chapters
Table of Contents
