Mounting Guidelines
Your VIBE enclosure is designed with a swift installation routine in mind.
Please mount the enclosure in a dry location on a solid surface.
NEVER mount the amplifier upside down as this will cause the amplifier to over heat
and will eventually damage the amplifier.
Before fixing the enclosure in place please ensure that there is sufficient air flow
around the exterior of the amplifier casing, at least two inches is sufficient.
Power Connections
Remote Turn On From Headunit
High Level Input Connections
NOTE : When using high level input it is not necessary to connect the remote turn on wire.
Do not connect both high level and low level input at the same time.
R E M
Chassis Ground
Fuse Close To Battery
Battery
Speaker Output From Headunit
4
R E M