Mounting Guidelines; Power Connections; High Level Input Connections - Vibe PULSE CBR 12A Owner's Manual

Mounting Guidelines

Your VIBE enclosure is designed with a swift installation routine in mind.
Please mount the enclosure in a dry location on a solid surface.
NEVER mount the enclosure upside down as this will cause the amplifier to over heat and
will eventually damage the amplifier.
Before fixing the enclosure in place please ensure that there is sufficient air flow around
the exterior of the casing, at least two inches is sufficient.

Power Connections

Low Level Input Connections

High Level Input Connections

Chassis Ground
Remote Turn On From Headunit
Fuse Close
To Battery
RCA Output From Headunit
NOTE : When using high level input it is
not necessary to connect the remote
turn on wire.
Speaker Output From Headunit
4