Advertisement
OPERATION
Read all important safeguards and operating instructions before using this
kettle. Discard the first pot of boiled water to remove any dust and residues
from the manufacturing process.
1. Standby mode
a. Place kettle on the power base.
b. Plug cord into wall outlet, and switch on.
c.
and
button indicator lights will be flashing, indicating that
the unit is in standby mode. If no operation is commenced within 2
minutes, the kettle will go into sleep mode and the
indicator lights will turn off.
2. Boiling water
a. Remove kettle from base.
b. Open the lid until it stands vertically. Do not bend the lid further
back than it is designed to.
c. Fill with the desired amount of fresh cold water. The kettle has
minimum (MIN) and maximum (MAX) indicator markings.
WARNING
Do not underfill or overfill the kettle. Overfilling may result in leaking of hot
water and permanent damage.
d. Close the lid.
e. Place kettle on the power base.
f. Press the
commence.
g. Once the water reaches 100°C, the blue LED light will turn off, and
the kettle will return to standby mode.
3. Keep warm mode
a. Press
button and cycle through the following temperatures: 40°C,
50°C, 60°C, 80°C, 90°C. The LED screen will flash for 3 seconds
and then lock in the temperature.
b. When the water temperature drops lower than the selected
temperature, the kettle will reheat the water automatically.
button; the blue LED light will turn on and boiling will
and
button
5
Advertisement
