Axion STIM-PRO T-400 Manual page 27

Regulating the pulse width
The pulse width can be adjusted from 30 µs to 300 µs. It
regulates the time for which the electrical signal is applied.
The current value is shown on the LCD display.
Timer
The device comes with a timer that can be adjusted from 1
to 60 minutes. It can also be set to continuous mode. The
application ends automatically when the timer runs out.
Program mode
The programs are chosen by pressing
mode. The programs run with pre-defined settings that can
not be altered (except in intensity).
STIM-PRO T-400
or in program
EN
25