Whirlpool RS677PX Use & Care Manual page 19

2. Push
the Bake pad to enter the Bake
mode.
Use
the Temp pad(s) to set the
desired temperature.
Push
A to raise the
temperature or V to lower the temperature
in 5°F increments.
Use
these pads until the
desired temperature shows in the small
display.
After you have set the desired temperature,
the display will show the set temperature
and the time of day. BAKE will light up.
3. Push
the Cook Time pad. "0:OO" with the
colon flashing and COOK TIME will show in
the display.
4.
5.
Use
the Hour and Minute pads to set the
desired cooking time.
Push the
"up" (A) or
"down" (V) pad(s) until the correct time
shows in the display.
This example shows a desired baking/
roasting time of 30 minutes.
Push
the Start/Enter pad. "Lo"", HEAT,
BAKE, TIMED and the set cook time will
light up in the display to show that the oven
is heating.
NOTE:
The display will show "door" and a
tone will sound once a minute for 5 minutes
if the door is latched when you try to bake/
roast.
You can change the temperature or time
setting
any
time after pushing the Start/
Enter pad by repeating just Steps 2
through 4.
6. The display will count down the baking/
roasting time in minutes.
19