Table of Contents
Advertisement
USI NG Y OU R R A NG E
Command pads
The command pads tell the oven what to
do and in what order. Some command pads
have an Indicator Light. The Indicator Light
comes on when you press the command
pad. The ON Indicator Light comes on
when you press the Start/Enter pad for an
oven function.
Using the control lock
The control lock prevents unwanted use of
the oven by disabling most of the control
panel command pads (except CLOCK and
TIMER SET/OFF).
NOTES:
•
Control lock is only available when oven
is not in use or control has not been set.
•
Set control lock when cleaning the control
panel to prevent oven from accidentally
turning on.
Starting a function
After programming a function, you must
press the Start/Enter pad to
start the function. If you do not
START
press the Start/Enter pad within
ENTER
5 seconds of programming,
5 SEC
"START?" will show on the display
as a reminder. The control will return to time
of day mode after 5 minutes if Start/Enter is
not pressed.
Canceling a function
The Off/Cancel pad will cancel any function
except for the Clock and Timer Set
functions. When you press the Off/
OFF
Cancel pad, the display will show
CANCEL
the time of day or, if Minute Timer
is also being used, the time
remaining. To cancel the Minute Timer see
"Using the electronic Minute Timer" section.
14
To lock or deactivate the control panel:
Press and hold the Start/Enter pad for
5 seconds. A single tone will sound
and "Loc" and
START
the temperature display. When the
ENTER
control is locked, "START?" will
5 SEC
appear on the display if you press
any command pad.
To unlock the control panel:
Press and hold the Start/Enter pad for
5 seconds. A single tone will
sound and "Loc" and
START
disappear from the temperature
ENTER
display.
5 SEC
NOTE:
You may hear a fan blowing in
the oven even after you press the Off/
Cancel pad. This is the cooling fan. It will
turn off when the oven cools down.
will appear on
will
Advertisement
Table of Contents
