Log Settings - YX MOIP Series User Manual

Fields are specified as following:

IP Address: Specify the ip address.

Packet Size: Specify the packet size.

Packet Count: Specify the packet count.
The ping tool is easy to check the gateway network status. Especially when calls can't connect
but every SIP parameters are correct, this tool will be helpful to find out problems.
The following is used to capture packets, non-professionals, please do not operate

9.3 Log Settings

This item is used to set the device needs to record the log and save the relevant information can be
used for engineering personnel to maintain and check the equipment status, please ignore in the
normal use.
YX Technical department
GSM/CDMA/WCDMA/4G(LTE) MOIP Gateway
~ 46 ~