Table of Contents
Advertisement
Quick Links
GSM/CDMA/WCDMA/4G(LTE) VoIP Gateway
YX
Series GoIP User Manual
V5.1.5
YX Technical department
January 26, 2022
www.yx19999.com;
www.yx19999.net
Huizhou :Huizhou YueXun Network Technology Co., Ltd (YX)
Hong Kong: YX International Information Co., Ltd
TEL: +86-752-2777557; +86-752-2777558
Email:
noc@yx19999.net
Address: 613,Bomeitang Building,NO.13 Maixin Road, Huicheng District, Huizhou,
Guangdong, China
~
~
YX Technical department
1
Advertisement
Table of Contents
Related Manuals for YX GoIP Series
Summary of Contents for YX GoIP Series
- Page 1 Series GoIP User Manual V5.1.5 YX Technical department January 26, 2022 www.yx19999.com; www.yx19999.net Huizhou :Huizhou YueXun Network Technology Co., Ltd (YX) Hong Kong: YX International Information Co., Ltd TEL: +86-752-2777557; +86-752-2777558 Email: noc@yx19999.net Address: 613,Bomeitang Building,NO.13 Maixin Road, Huicheng District, Huizhou,...
-
Page 2: Table Of Contents
7.4.2 Base Station..........................25 7.4.3 Hardware properties........................26 7.5 Basic Station(3G/4G devices do not have this function)..............27 7.5.1 Basic Settings..........................27 7.5.2 Base stations Settings/Operations...................27 7.6 IMEI Setting............................28 7.7 Rules Setting............................30 7.7.1 Dialing Plan..........................30 7.7.2 Prefix............................30 7.7.3 Black list............................32 YX Technical department... - Page 3 7.17 Call Duration Settings........................48 7.18 Call Number Limit..........................50 7.19 Talk Number Limit..........................50 7.20 Call Ctrl Settings..........................51 7.21 Auto Recharge...........................51 7.19 Status Notification..........................52 7.20 Internet Setting..........................53 8 SMS Setting............................53 8.1 Port Setting............................53 8.2 SMS Setting............................54 YX Technical department...
- Page 4 10.2 Access from Mobile Network to IP....................71 11 HTTP API............................72 11.1 Send SMS............................72 11.1.1 GET HTTP..........................72 11.1.2 POST HTTP..........................72 11.2 Receive SMS............................72 11.3 USSD..............................73 11.3.1 HTTP Send URL ........................73 11.3.2 HTTP back：...........................73 YX Technical department...
-
Page 5: Introduction
LCR: Least Cost Routing. USSD: Unstructured Supplementary Service Data. GSM: Global System Communications. CDMA: Code Division Multiple Access. WCDMA: Wideband Code Division Multiple Access. CDMA: Code Division Multiple Access LTE(FDD-LTE TDD-LTE): Long Term Evolution YX Technical department... -
Page 6: Equipment Information
YX series GOIP Gateway is a multi-functional and high performance product, which is designed with advanced embedded technology. YX series is able to process traditional voice call service and internet data service. perfectly support G729a/b/e、G723.1、G.711 a/u law and iLBC codecs at the same time. -
Page 7: Special Features
SIM Card Rotating SIM card check and switch rules: Accumulated Call Duration Accumulated Connected Calls Accumulated Calls Consecutive Failed Calls Consecutive No-Alert Calls Consecutive No-Answer Calls Consecutive No Carrier Calls YX Technical department... -
Page 8: Specification
Hot-line call ,Dial plan, Speed dial, Phone book, CDR, LCR, Telephony Features White/Black list DTMF tone dectection/generation DTMF relay: in-band, RFC 2833 and SIP info Call forward: Telephony Signaling unconditional, no answer and busy N-way conferencing Caller ID display/generation, Mobile Number Portability YX Technical department... -
Page 9: Mobile Features
WEB Remote Management System SMPP support HTTP Command 3 Equipment Installation This chapter describes how to install a new GoIP Gateway to a physical network environment, how to initialize it and start it in a proper way. YX Technical department... -
Page 10: Network Setup
Ethernet Cable should be connected to Network port of route or switch. 4) Connect an Ethernet Cable to the Network port of GoIP Gateway. The other end of the Ethernet Cable should be connected to PC or other network device. (Optional) 5) Plug in the GoIP Gateway. YX Technical department... -
Page 11: Led Indicators
As an example, the following introduction will base on the GoIP Gateway with WAN IP 192.168.1.10. 4.1 Login First, connect a computer to the same LAN with GoIP, add the GoIP IP segment in the computer. If your computer's IP address is not 192.168.1. XXX, how to change: YX Technical department... - Page 12 GSM/CDMA/WCDMA/4G(LTE) VoIP Gateway Save it Open web browser and access URL http://192.168.1.10. The default login page will be displayed as following. YX Technical department...
-
Page 13: Guider
The default login account and password are: Account root Password root It is recommended to use IE/FireFox/Chrome to access the web pages. After successfully logged in, the main page to set Gateway is as following: 5 Guider YX Technical department... -
Page 14: Status Information
Account: Specify the SIP account for registration. Password: Specify the SIP password for registration. Note: The settings of Phone Number, Account and Password are globally active. They will apply to all SIP ports settings in SIP Protocol page. 6 Status Information YX Technical department... -
Page 15: Call Status
LED color and port status.( When registering a card, the description of the card may not be displayed in real time. Please refer to the information displayed on the icon) 6.1.2 Call Statistics The screenshot below shows the call statistics information for analysis. YX Technical department... -
Page 16: Device Status
Registration Status: Shows the port registration to SIP server infomation status. Module Status: Shows the port Module use status(Yes/No). If NO is displayed,please try restarting. If still, Please contact YX NOC IMEI: Specify the port current using of IMEI. -
Page 17: System Status
The reported information can help you get the system status detail in a fast, simple way. 6.4 Traffic Statistics This is used to count the internet traffic of the card in use 6.5 Media Statistics Here statistics IP network media and traffic data situation YX Technical department... -
Page 18: Sms Statistics
Inc calls: Specify the total incoming calls since the last start up of inter calling system. Out Calls: Specify the total outgoing calls since the last start up of the inter calling system. Success: The number of successes in Inter-Calling Failed: The number of failed in Inter-Calling YX Technical department... -
Page 19: Gateway Settings
The screenshot below shows the operation mode to set phone book. Phone book is a list contains the relationship between destination phone prefix and gateway information.( If your GOIP is not set public IP, please do not operate this feature) YX Technical department... -
Page 20: Sip Setting
SIP Settings will be described in this paragraph. It mainly targets to set up parameters related to SIP server, SIP account and SIP password for SIP registration. The screenshot below shows the operation mode to set SIP running parameters. YX Technical department... - Page 21 Primary Proxy IP: Specify the primary proxy IP.( Use this need to install proxy server in your server, please contact YX NOC) Secondary Proxy IP: Specify the secondary proxy IP. Expiration Period: Specify the expiration period for registration.
- Page 22 If you turn on the following settings, make sure your caller's number is the same as the Phone Number ,But you also can try open this set The screenshot below shows the operation mode to set STUN YX Technical department...
- Page 23 Silence Suppression: Turn on to save bandwidth , If you do not need to be able to shut down Adaptive Jitter Buffer: Specify whether enable Jitter Buffer or not. IP TOS: Specify whether enable IP TOS or not. YX Technical department...
- Page 24 RTP Ptime: Specify the interval of RTP packages. RTP Start Port: Specify the RTP start port. The following settings unless necessary, do not change Auto Drop : You can set up to automatically hang up the call YX Technical department...
-
Page 25: Port Setting
Time Interval: Query balance regularly. Manually Call: Manually input a number, let the sim card mark a call 7.4.2 Base Station The screenshot below shows the operation mode to set Basic Settings of Port settings YX Technical department... -
Page 26: Hardware Properties
Restart: Restart the module More: Hot-line: Specify a sip phone on the softswitch to pick up the incoming calls Unconditional Forward/ No Answer Forward Number/ Busy Forward: These parameters are designed to be used with a third party system. YX Technical department... -
Page 27: Basic Station(3G/4G Devices Do Not Have This Function)
White List: Specify the white list of base station, can be multiple, use a comma. Black List: Specify the black list of the base station, can be multiple, use a comma. Operations: When click the refresh button will change a new base station. YX Technical department... -
Page 28: Imei Setting
Customize Range: The screenshot below shows the operation mode to set Dynamic IMEI for each card of the designated port. If a card on a port is assigned with a group of IMEIs, it will randomly use any of the IMEI in group to communicate with mobile base. YX Technical department... - Page 29 Click Delete on the right of each record to delete the current record. A message box will be popped for delete confirmation. Get IMEI From Server: Get IMEI from server, needs to be used with SIM Server and set on SIM Server YX Technical department...
-
Page 30: Rules Setting
The plan 33[1-5] means the dialed number starts with 33 and the last digit is any of 1/2/3/4/5. So any of the input 331, 332, 333, 334 or 335 is acceptable. 7.7.2 Prefix The screenshot below shows the operation mode to set manipulation for dial prefix. YX Technical department... - Page 31 4 digits and add 0,when dial 0086123456789,the gateway will strip 0086 and add 0 call 0123456789. Callerld Hidden Callerld Hidden:Enable or disable caller ID hidden.Your carrier must support that function. Dial prefix:Use the dial prefix you set when enable caller ID hidden. YX Technical department...
-
Page 32: Black List
Callee Length: Specify the callee length of black list. 7.8 SIM Settings SIM Schedule This function is used to set the SIM card usage policy, for example, As shown, it means that these SIM cards will be used between time: 00:00-8:30 . YX Technical department... -
Page 33: Mobile Setting
But when you select disable the call will not be hangup. USSD Check: Specify whether enable to get balance through USSD check or not. This field takes effect only when GoIP Billing is set to Enabled. YX Technical department... -
Page 34: Ussd/Sms Query Keyword List
1 minute) Invalid Balances: Balance after calibration, the implementation of automatic calculation of the balance again, when less than the invalid value will lock, and prompts you(Usually set the balance of 1 minute) 7.9.3 USSD/SMS Query Keyword List YX Technical department... -
Page 35: Tariff List
Click button Add New to expand the data input area to add new data. Fields are specified as following: Data Status: Mark the status of current data record. Option values are Add/Edit. Value Add means the data is new while value Edit means the data is old. YX Technical department... -
Page 36: Ussd Setting
USSD) By Dur.: Automatic timed send. By Call Dur.: Automatic send according to the call time. By Schedule1/2/3: Send USSD within the specified time. Drop: When enabled, hang up calling automatically when conditions are met. YX Technical department... -
Page 37: Ussd List
7.11.1 Scheduled Sending SMS SMS Warning: A SMS warn the gateway manager to check the SIMs when they are locked(Not mobile operator blocking, it’s the politic schedule to limit the SIM use time, use frequency to avoid blocking). YX Technical department... -
Page 38: Sim Online Time Checking
The condition parameter(Accumulated Duration: which means the maximum talk time, unit: min) Locking Duration: Here to set the card slot lock time, fill -1 means always locked that when you manually replace the SIM card will reset YX Technical department... -
Page 39: Accumulated Connected Calls Checking
Locking Duration: Here to set the card slot lock time, fill -1 means always locked that when you manually replace the SIM card will reset 7.11.5 Accumulated Calls Checking Please refer to 7.11.4 for instructions 7.11.6 Consecutive Failed Calls Checking Failed Calls: This is only valid if a consecutive call fails YX Technical department... -
Page 40: Consecutive No-Alert Calls Checking
7.11.9 Consecutive No Carrier Calls Checking : This is only valid if a consecutive No Carrier Calls No Carrier Calls(This condition refers to the call failed, probably due to poor or unstable signal quality) Other : Please refer to 7.11.4 for instructions YX Technical department... -
Page 41: Consecutive Short-Duration Calls Checking
Fast-Alerting Count: Fast-Alerting Count Max Alerting Time: Here you need to fill in the time, the contact time is lower than it, the device will think it is Fast-Alerting. Other : Please refer to 7.11.4 for instructions YX Technical department... -
Page 42: Consecutive Fast-Answer Calls Checking
SIM card becomes unavailable, When you confirm that this code appears means that the card can not be used, you can set it here Release Cause Times: This is only valid if a consecutive Release Cause Times YX Technical department... -
Page 43: Accumulated Sms Count Checking
Other : Please refer to 7.11.4 for instructions 7.11.16 Consecutive Failed SMS Count Checking Consecutive Failed SMS: This is only valid if a consecutive Failed SMS Other : Please refer to 7.11.4 for instructions YX Technical department... -
Page 44: Accumulated Received Sms Count Checking
SMS, the SIM will be locked! 7.11.19 Port Inter Call Checking This function is used to detect the number of times the ports hit each other, lock or lock and switch SIM cards when the conditions are met ! YX Technical department... -
Page 45: Sim Pool Setting
SIM Allocation Mode: Active mean that GOIP voluntarily applied for a SIM card to SIMServer / SIMBANK Use Local Policy: When enabled, the settings for GOIP Automation will take effect, and the Automation settings will be obtained from SIMServer when disabled Signal Transport: When UDP is unstable, you can try TCP YX Technical department... -
Page 46: Intercall Setting
By Device Online Time: Gateway will start port inter calling by the device online time, and the time between min interval and max interval. Consecutive Failed Calls: Gateway will start port inter calling when reaches the consecutive failed calls. YX Technical department... -
Page 47: Sim Num Settings
Number C: Specify the number for card C of the port Number D: Specify the number for card D of the port Number More.. 7.15 Callback Settings Set here, when the device receives a call, you need to return the number of the call YX Technical department... -
Page 48: Call Waiting Settings
Month Max Duration: Month max duration need set the correct time. For example ,set 360 minutes, the sim has 360 minutes call duration every month. Daily Max Duration: daily max duration need set the correct time. For example ,set 360 minutes, the sim has 360 minutes call duration every day. YX Technical department... - Page 49 Status: it shows the sim status. Total Duration: Specify the total duration has used. Remain Duration: Specify the remain duration. Daily Duration: Specify the daily duration has used. Daily Rem Dur.: Specify the daily remain duration. YX Technical department...
-
Page 50: Call Number Limit
7.18 Call Number Limit This function is similar to Call Duration Settings, but controls the number of calls ! 7.19 Talk Number Limit This function is similar to Call Duration Settings, but controls the number of Talk ! YX Technical department... -
Page 51: Call Ctrl Settings
Max Val: set condition value. 7.21 Auto Recharge This item is used to configure automatic recharge settings, which need to be used with automatic recharge server(If you have server, please contact YX NOC install auto recharge software) YX Technical department... -
Page 52: Status Notification
GSM/CDMA/WCDMA/4G(LTE) VoIP Gateway 7.19 Status Notification This setting is used to push the status information of the device to the specified server! YX Technical department... -
Page 53: Internet Setting
APN Setting: Please enter the APN you want to define in different carrier codes 8 SMS Setting 8.1 Port Setting This setting can enable or disable the SMS function of the port, and set the SMS center number YX Technical department... -
Page 54: Sms Setting
Port: Specify the port. Sender: Specify the sms sender. Time: Specify the sms receive time. Content: Specify the sms content. Back: Back to the SMS content web page. Refresh: Refresh the web page. YX Technical department... -
Page 55: Sms Settings
SMS (This feature depends on carrier support) Other settings: if you are not familiar with it, please keep the default! 8.2.3 Scheduled Sending This function is set to send SMS automatically Fields are specified as following: Content: Specify the sms content. YX Technical department... -
Page 56: Sms Forward
Field Failed SMS Number records down the total number of SMS which is sent failed. 8.3 SMS Forward 8.3.1 Email to messages This function is used to set up to send a short message according to the content of the email when an email is received! YX Technical department... -
Page 57: Sms To Http
Sender: the sender who receives the SMS. Receiver: If you need ,Specify the receiver. Device Port: The port number to receive this SMS in device. Charset: Specify the charset, UTF-8/BASE64/PDU. Content:SMS Content. YX Technical department... -
Page 58: Basic Settings
Server IP: Specify the sms server ip. Content-Type: Specify the Content-Type. Content Charset: Specify the content charset. Forward Protocol(Email): Content Before:Format, Disable:content will in front; Enable:content at the end. Multiple Port:Set by every ports. YX Technical department... -
Page 59: Sms Ctrl Setting
Max SMS / Month: One Month the maximum total number of sent SMS Statistics: Here will be Statistics all ports to send SMS data situation(Reset button to reset the sending status of this card) This data will be stored in the sim card YX Technical department... -
Page 60: Smpp Setting
Please set the “account” “password” and “port number” and let the client settings same and registration to GOIP Sms Report: If you need sms report, please enable this setting, generally please keep it enabled If the registration is successful, the status will prompt green “transceiver” YX Technical department... -
Page 61: Eims Setting(Sms Server Registration)
This setting only support SMPP connect , This setting is used to limit the prefix of the number when running the network SMS business to ensure that the number number conforms to the sending rule of the SIM card. YX Technical department... -
Page 62: Sms Filter
The screenshot below shows the operation mode to set codec priority. Three codec types are provided to adjust GoIP Gateway to different network environment. It support G729a/b/e,G723.1,G711A/U law,iLBC,AMR auto- selecting. The screenshot below shows the operation mode to set voice settings. YX Technical department... -
Page 63: Network Debug
Fields are specified as following: Auto Ping: Specify whether enable auto ping, when the device power on to runing. IP Address: Specify the ip address. Packet Size: Specify the packet size. Last Time: Specify the ping duration. YX Technical department... -
Page 64: Log Settings
This item is used to set the device needs to record the log and save the relevant information can be used for engineering personnel to maintain and check the equipment status, please ignore in the normal use. YX Technical department... -
Page 65: File Management
GSM/CDMA/WCDMA/4G(LTE) VoIP Gateway 9.4 File Management This is used to export and view log files, please ignore in the normal use 9.5 User & Device 9.5.1 User The screenshot below shows the operation mode to manage system user. YX Technical department... -
Page 66: Device Settings
Another shortcut button is also provided on the top right of Data List to delete multiple selected records in batch. A message box will be popped for confirmation of batch delete. 9.5.2 Device Settings The screenshot below shows the operation mode to set Device settings. YX Technical department... -
Page 67: Date And Time
Network must be available for the gateway to communicate with ERM Server, When the registration is complete, you can access your device from the ERM server at any time/address. YX ERM Server(You can register directly through the registration button to register and follow the prompts to use) domain name: goip.yx19999.com... -
Page 68: Snmp
Password: Specify the password which create in the ERM. Status: Specify the registration status. 9.5.5 SNMP This is the connection configuration for the SNMP protocol, which you can configure if you have an SNMP server YX Technical department... -
Page 69: Role Management
Role Name: The default is Admin and User, If you need to configure related permissions, you need to add a Role Home: The default home page is displayed Permit: The list of permissions this role can use 9.7 Update/ backup & Restore The screenshot below shows the operation mode for system update/restore. YX Technical department... -
Page 70: Save & Reboot
GoIP Gateway. The screenshot above shows the operation buttons. Button Save is used to save all the modifications while button reboot is used to save modifications first and then reboot device immediately. 10 Typical Used Scenario YX Technical department... -
Page 71: Landing From Ip To Mobile Network
GoIP Gateway can be used as the access from mobile network to IP. Any call made to the mobile card inserted into GoIP Gateway will be routed to IP network and connected to Softswitch server. The Softswitch server can redirect the caller to final destination user. YX Technical department... -
Page 72: Http Api
PhoneNumber:Receiver Phone Number; Content:SMS message content; Send Success Back: for example: {"code":200,"reason":"OK","type":"task-status","status":[{"tid":98,"status":"0 OK"}]} 11.2 Receive SMS HTTP URL format is like this :http://host:port/goip_get_sms.html?username= device login username&password=device login password &sms_id=xxx&sms_num=xxx YX Technical department... -
Page 73: Ussd
1 port. ussd: the ussd contents (if your ussd have #,please use %23 instead) 11.3.2 HTTP back： Demo: {code:0,reason:”OK”,resp:”your balance is 100.00$”} code: back code reason: ussd send status resp: ussd contents. YX Technical department...
Need help?
Do you have a question about the GoIP Series and is the answer not in the manual?
Questions and answers